Description
The SNT-V501 is a compact, high-performance video network station that enables video cameras to be remotely monitored and controlled over a network. The SNT-V501 allows you to easily monitor smooth, near-motion JPEG images at a high refresh rate of 30 frames per second and is equipped with one PCMCIA card slot. Support for a PCMCIA card slot, plus a number of convenient features such as alarm and image transfer functions, enables scalable and effective monitoring operation. Converting existing analog cameras to an IP-based monitoring system just got easier with Sony’s SNT-V501 – the ideal solution for today’s network monitoring demands.
Embedded Web Server – 100Base-TX/10Base-T (RJ-45) Supports TCP/IP protocol for control over LANs (Local Area Networks) and WANs (Wide Area Networks)) Up to 50 simultaneous users can access a single camera to monitor images) Up to 30 frames per second – smooth, clear VGA image) Compact and light weight – 5-1/8 x 1-5/8 x 6 inches / 1 lb. 7 oz.) One PCMCIA Type II card slot for wireless LAN card 802.11b or additional memory) Built-in Activity Detection Function – Alarm Output and Input Ports) Image transfer to an FTP server) Video Input: Analog composite (BNC x1), 1.0 Vp-p, 75 ohms, unbalanced sync negative / Auto Sensing for NTSC Though Video Output: Analog composite (BNC x1), 1.0 Vp-p, 75 ohms, unbalanced, sync negative CPU: 32-bit RISC processor RAM: 32 MB (including 8 MB alarm buffer) Flash Memory: 8 MB Image Size: 704 x 480, 640 x 480, 320 x 240, 160 x 120 Compression Method: JPEG Compression Ratio: Approx. 1/5 to 1/60 (10 steps) * The compression ratio is based on an image of 24 bits/picture element (8 bits for each R, G and B). Frame Rate: Max. 30 fps (640 x 480) Protocols: TCP/IP, ARP, ICMP, HTTP, FTP (server/client), SMTP, DHCP, DNS, NTP, SNMP (MIB-2)
Number of clients: Max. 50 Ethernet: 100Base TX/10Base-T (RJ-45) Sensor Input: (1) 3.3 to 24 V DC device supported, photo coupler inputs electrically isolated from this unit Alarm Output: (2) 24 V DC or less, 1 A, mechanical relay outputs electrically isolated from the camera Serial Interface: RS-485/RS-232C (for camera control or transparency function) PC card slot: PCMCIA Type II (1) Mass: Approx. 650 g (1 lb. 7oz) Dimensions (W x H x D): 128 x 40 x 150 mm (5-1/8 x 1-5/8 x 6 inches) excluding protruding parts Power Requirements: DC 12V or AC 24V Power Consumption: 10.0 W max. Operating Temperature: -10 to 50 C (14 F to 122 F) When PC card is attached: -10 to 40 C (14 to 104 F) Storage Temperature: -20 to 60 C (-4 to 140 F)
Reviews
There are no reviews yet.