Description
The new HD coaxial tester is developed for the On-Site installation and maintenance of coaxial camera, it also combine other function analog camera test, video level meter, analog signal output, IP address scan, Ping, port finder, UTP test, digital multimeter, optical power meter and TDR cable tester etc. Its portability, user-friendly design and many other functions make the IP tester an essential tool all installers or technicians.
CCTV Resolution Comparison
Features
- 3.5 inch screen display, 480 (RGB) x 320 resolution
- Low power consumption, working time lasts 11 hours
- LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust
- CVI/TVI/AHD coaxial camera image display, coaxial PTZ control and call up the camera OSD menu
- Enhanced color bar generator, PAL/NTSC multi-system color bar video generator (Eight-system
switchable, transmit/receive eight-system colorful images) - LED Flashlight
- HD coaxial control, PTZ control, color bar generator shortcut key
- F1, F2 user-defined key
- Visual fault locator, to test fiber’s bending and breakage (Optional)
- Digital Multi-meter, DC and AC voltage measurement, Resistance measurement continuity test, Diode
measurements, Capacitance measurement (Optional) - Cable tracer by sending the audio signal enables the blue cable tracer tester to find the connected cable from messy cables (Optional)
- Ping test, PING is the most conventional network debugging tools, it is used for testing if the connected IP camera or other network equipment’s Ethernet port is working normally and the IP address is correct
- The IP address scan can quickly search for connected IP cameras or another network device IP address
- POE voltage tests the PoE voltage from a PoE switch. The unit will clearly display the voltage for each wire in an Ethernet cable
- Port finder, it will enable the installer to easily and quickly find the connected port for and Ethernet cable
- Link monitor check if the new setting IP address is occupies
- TDR cable test, TDR break-point and short-circuit measurement (Optional)
- PTZ control and PTZ protocol analysis
- Cable test, Test LAN cable or telephone cable, UTP cable etc. cable type and the sequence of wires will be displayed
- Support more than 30 protocols, such as Pelco-D, Pelco-P, SAMSUNG
- Support RS232/RS485, rate 600 ~ 115200bps adjustable
- Built in Lithium Lon Polymer Battery (3.7V DC 3000mAh)
- Image display and data control integration
- Handheld HD coaxial tester, easy to carry and operation
- Optical power meter, test fiber loss and value (Optional)
- HD SDI tester, support 1080p (Optional)
