Description
The Pace1PRD is a long range Ethernet receiver. It is powered via a NetWay1D Single Port Hi-PoE Injector. The receiver passes Hi-PoE (60W) over the cable to the eBridge200WPM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over structured cable.
Features
- UL/CUL Listed for Information Technology Equipment (UL 60950-1)
- CE approved
- Powered by NetWay1D Hi-Poe (60W) Injector
- Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5e or a single twisted pair UTP
- Throughput is rated to pass 100mbps of data
- Distance: up to 500m @ 100mbps
- Green – PoE ON (by respective RJ45 jack)
- RJ45 jack: Yellow and Green LED IP Link status, 10/100Base-T/active
- -4ºF to 120.2ºF (-20ºC to +49ºC)
- -22º to 158ºF (-30º to +70ºC)
- Relative humidity: 20 to 85%, non-condensing
- Operating Altitude: -1000 to 6,561.679 ft. (-304.8 to 2000m)
- Auto detection and protection of legacy non-PoE cameras/devices