Description
The UAPg2 from Bogen is a universal audio processor generation 2. The UAP G2 represents a significant step forward in audio processing. Stackable up-to 12 units inputs can be selected in blocks of four (0 in – 16 out, 4 in – 12 out, etc.). Inputs are mic or line level, with phantom power selectable individually. Moreover, the system is programmable via a single ethernet cable, but using a static IP address the G2 also can be diagnosed and controlled from any computer connected to the internet.
The UAP offers some features not found in any other DSP products on the market today. Most notable are the 8 assignable variable controls on the front panel. Each may be assigned to any DSP function in your design, and each is fully scalable. Or, use your own 10k pots and program up to 6 field remote controls per box of your own design. There is also a built-in TTL Logic control featuring 16 digital inputs and 8 fully programmable general purpose IO’s for control of other equipment.
Features
- 16 Inputs or Outputs selectable in blocks of 4
- Digital Message Card with 20 minutes of 16 kHz audio with advanced scheduler
- 10 Design Presets and hundreds of sub presets
- All standard DSP components in the library
- 16 TTL logic inputs and 8 GPIO’s for control of other systems
- 48 or 96 kHz audio processing using a 24 bit A/D and D/A converters with 32 bit SHARK 266 MHz chips
- RS-485 remote control (URC) and PPM paging mic available
- Noise Sensing Microphone Input
- Link up-to 12 units and share 12 channels of audio + data on the network
- Easy set-up RS-232 support for AMX, Crestron, or Windows XP PC
