Description
The RLMCSFP/24DC/M12 from Comnet is a RLMC is a substation-rated and industrially hardened Ethernet media converter. It is intended for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations
and switchyards, heavy manufacturing facilities, trackside and roadside electronic equipment, and other difficult out-of-plant applications. User-selectable link fault pass-through provides remote indication of a network fault, and a summary fault alarm provides a local or remote indication via a dry contact closure in the event of loss of optical link or operating power. The 10/100/1000BASE-TX port supports both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required.
Features
- Full duplex transmission of 10/100/1000 Mbps Ethernet
(1) 10/100/1000BASE-TX port and
(1) 100BASE-FX or 1000BASE-FX optical port - Designed to the requirements of IEC 61850-3 and IEEE 1613 Class 2 for electrical utility substations, EN50155 and EN50121-4 for railway applications, and NEMA TS-1/TS-2 for traffic signal control equipment, and IEC/EN60950-1
- Extended ambient operating temperature range of -40º to +85º C, for use in virtually any environment. Optional conformal coating available for humidity with condensation or airborne particulate matter environments
- Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fiber, optical connector types, and optical transmission distances of up to 120 km
- Link fault pass-through provides a remote indication of a network fault
- 10/100/1000BASE-TX port supports both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required
- Internal/self-contained high-reliability power supply eliminates the need for an external power supply, and a screw terminal block connects directly to the power source for permanent, reliable, and maintenance-free operation
- No fans or forced-air cooling required; cooling via natural convection eliminates unreliable and troublesome fans/moving parts for improved reliability
- Indicating LEDs confirm operating status of the media converter and the link for ease in troubleshooting
- Summary fault alarm provides a local or remote indication via a dry contact closure in the event of loss of optical link or operating power
- Rugged 19-gauge galvanized & powder-coated steel enclosure may be DIN-rail or panel-mounted
- Made in the USA
