Description
The IFS® Power over Coax – PoE-at Media Converters are designed to extend both Ethernet data and PoE over existing coax cable up to 1Km (3,280 ft). This Power over Coax solution consists of a transmitter and receiver set, which works as a pair with or without a power adaptor depending on the installation confi guration and power requirements needed. The MC252-1T-1CXP is designed for the head end/switch
end. The module transmits Power over Coax and is powered by an external power adaptor or can be powered directly from a port on a PoE switch.
Features
VDSL2
- Cost-effective VDSL2 CO/CPE bridge solution
- CO/CPE selectable via DIP-switch
- Selectable target data rate and target SNR margin
- Discrete Multi-Tone (DMT) line coding
Ethernet
- 10/100Mbps Ethernet
- Half-duplex back pressure and IEEE802.3x full-duplex pause-frame fl ow control
- Supports up to 1536 bytes packet size
- 802.1Q VLAN tag transparent
Power over Ethernet
- Complies with IEEE 802.3at
- Inserts 52VDC (30w) power on coax (Dependent on Power Source and Coax Distance)
- Protects non-PoE devices if accidentally connected
- Backwards compatible with IEEE802.3af
- Flexible power source either external DC or PoE power input
Installation & Diagnostics
- Plug-and-play installation
- Compact size
- Supports 50 or 75 ohm coax
- Extensive LED indicators for network diagnostics
Robust Hardened Design
- IP30 metal enclosure
- Wall-mountable
- 52 ~ 56VDC operation
- Complies with IEC60068-2-xx standards for free-fall, shock and vibration
- Wide operating temperature range of up to -40ºC ~ 75ºC
