NVT NV-704J-PVD Cable Integrator

$75.00

Typically installed in the Wiring Closet or IDF room, the NVû704JûPVD is a passive “pass-through” wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom data onto a minimum of 4-pair RJ-45 cables.

SKU: NV-704J-PVD Category:
 

Description

The NV-704J-PVD from NVT is a 4-Ch PVD Cable Integrator. It is typically installed in the Wiring Closet or IDF room, the NV-704J-PVD is a passive “pass-through” wiring device that efficiently consolidates camera power, video and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables. The NV-704J-PVD from NVT is a 4-Ch PVD Cable Integrator that converts Power, video and data at the camera using a PVD transceiver which utilizes a single 4-pair cable with RJ45 connectors to deliver each camera’s signals to the NV-704J-PVD. Up to four cameras are supported. The NV-704J-PVD receives low-voltage camera power from any third-party Class 2 power supply. Control Room video connections are achieved with a single 4-pair RJ45 cable. P/T/Z telemetry data, if required, pass through a second 4-pair RJ45 cable and delivers P/T/Z telemetry. Control Room connections may be made using any multi-channel NVT receiver or hub. All equipment employs industry-standard EIA/TIA 568B pinouts.

Features

  • Connectivity for up to four cameras, each via a single RJ45 4-pair cable
  • Use with the NV-216A-PV or NV-218A-PVD transceivers or the NV-226J-PV transmitter at the camera
  • Uses any third-party power supply to power cameras via UTP over significant distances (see Power Distance Calculator)
  • Cable-management solution from the camera to the Wiring Closet and on to the Control Room
  • Wall-mountable; rack-mountable using the NV-RM8/10 panel
  • Limited lifetime warranty

PDF Spec Sheet

Additional information

availability

Manufacturer

Reviews

There are no reviews yet.

Be the first to review “NVT NV-704J-PVD Cable Integrator”