eFlow102NA8DV distributes and switches power to access control systems and accessories. It converts a 220VAC 50/60Hz input into eight (8) independently controlled 12VDC PTC protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.
Features
Input
- Input 220VAC 50/60Hz, 2.1A
Power supply input options
- Eight (8) Access Control System trigger inputs
Input options
- Eight (8) normally open (NO) inputs
- Eight (8) open collector inputs
- Any combination of the above
- ACM8CB board main fuse is rated at 10A
Output
- 12VDC output @ 10A supply current
- Power-limited outputs
- Eight (8) independently trigger controlled outputs
Output options
- a) Eight (8) Fail-Safe filtered power outputs
- b) Eight (8) Fail-Secure filtered power outputs
- c) Any combination of the above
- Eight (8) unswitched filtered aux. power outputs (outputs are rated @ 2A)
- Over Voltage protection
- Short circuit and thermal overload protection
Fire Alarm Disconnect
- Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
Fire Alarm disconnect input options
- a) Normally open (NO) or normally closed (NC) dry contact input
- b) Polarity reversal input from FACP signaling circuit
- Alarm output relay indicates that FACP input is triggered (form “C” contact rated @ 1A 28VDC not evaluated by UL)
Reviews
There are no reviews yet.