Altronix EFLOW102NX8V Power Supply Charger, 8 Fused Outputs, 12VDC @ 10A, Aux Output, FAI, LinQ2 Ready

Altronix eFlow102NX8V is a power supply/charger that converts a 220VAC (working range 198VAC – 256VAC), 50/60Hz input into eight (8) fuse protected 12VDC outputs with a total of 10A max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Input

• 220VAC (working range 198VAC – 256VAC), 50/60Hz, 2.1A
• Input fuse: 5A/250V

Output

• Eight (8) fuse protected outputs
• Outputs are rated @ 2.5A
• 12VDC @ 10A supply current
• Auxiliary output rated @ 1A (unswitched)
• Overvoltage protection

Battery Backup

• Built-in charger for sealed lead acid or gel type batteries
• Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption

Supervision

• AC fail supervision (form “C” contacts)
• Notification trigger is selectable for 30 seconds (factory set) or 2 hours
• Battery fail and presence supervision (form “C” contacts)
• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Fire Alarm Disconnect

• Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger

Electrical

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity 85% +/- 5%

BTU/Hr (approx.): 61 BTU/Hr

System AC input VA requirement: 462VA

Visual Indicators

• Green AC Power LED indicates 220VAC present
• AC input and DC output LED indicators

Additional Features

• Short circuit and overload protection
• Unit is complete with power supply, enclosure, battery leads, and cam lock