Altronix EFLOW6NV Power Supply Charger, Single Output, 12/24VDC @ 6A

Altronix eFlow6NV is a power supply/charger that converts a 220VAC (working range 198VAC – 256VAC), 50/60Hz input into a selectable 12VDC or 24VDC output with a total of 6A max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Features

Input

• 220VAC (working range 198VAC – 256VAC), 50/60Hz, 2.5A
• Input fuse: 5A/250V

Output

• 12VDC or 24VDC @ 6.0A supply current
• Auxiliary output rated @ 1A (unswitched)
• Overvoltage protection

Battery Backup

• Built-in charger for sealed lead acid or gel type batteries
• Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption

Supervision

• AC fail supervision (form “C” contacts)
• Notification trigger is selectable for 30 seconds (factory set) or 2 hours
• Battery fail and presence supervision (form “C” contacts)
• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Fire Alarm Disconnect

• Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger

Electrical

Temperature:

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)
• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 12VDC: 37 BTU/Hr
• 24VDC: 74 BTU/Hr

System AC input VA requirement: 550VA

Visual Indicators

• Green AC Power LED indicates 220VAC present
• AC input and DC output LED indicators

Additional Features

• Short circuit and overload protection
• Unit is complete with power supply, enclosure, battery leads, and cam lock