Altronix NetWay16MV Managed Midspans provide power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement. NetWay Managed Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.
Features
Input
- 220VAC 60Hz, 2.5A
Power
- Sixteen (16) ports of cameras/edge devices over ethernet (CAT5) cable up to a distance of 100m per port
- Unit provides up to 30W max. full power per port
- Total power: 300W
- IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) compliant
- Short circuit protection
Functions
- Programmable PoE shutdown for each port. Utilized to reset cameras/edge devices
- Auto detection and protection of legacy non-PoE cameras/edge devices
Features
- LAN or laptop connection enables programming of PoE shutdown and port monitoring
- User interface
- Illuminated master power disconnect circuit breaker with manual reset (switch)
- Individual port status LEDs
- IEC 320 – 3-wire grounded line cord (detachable)
Temperature
- Operating: – 20° C to 40° C (-4° F to 104° F)
- Storage: – 20° C to 70° C (-4° F to 158° F)
- Relative Humidity 85% +/- 5%
- BTU/Hr. (approx.): 154 BTU/Hr
- System AC input VA requirement: 550VA
Operating Altitude
- – 304.8 to 3,048m ( – 1,000 to 10,000 ft.)
Reviews
There are no reviews yet.