Altronix T1KE38D kit consists of Trove1 enclosure and TLU1 Altronix & Kisi backplane with 12VDC or 24VDC (factory set at 24VDC) @ 6A power supply/charger and two (2) four (4) PTC protected output access control modules. This kit also accommodates various combinations of Kisi boards for up to eight (8) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
Features
AL600ULXB Power Supply/Charger
Input
- Voltage: 115VAC, 60Hz, 3.5A max
- Input Fuse: 5A / 250V
Outputs
- Voltage: 12VDC or 24VDC selectable
- Current: 6A @ 12VDC or 24VDC continuous max
- Other: Filtered and regulated
Battery Backup
- Capacity: 7AH/12VDC (Up to 2 within enclosure); 12AH/12VDC (requires separate enclosure); 40 AH/65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
Supervision
- AC Failure: Form “C” contacts
- Battery: Form “C” contacts
Indicators LED
- Input: 115VAC is present
- DC Output: Powered
- Battery: Discharged or not connected
Two (2) ACM4CB Access Power Controllers
Input
- Voltage: 24VDC from AL600ULXB
- Input Fuse: 10A / 32V
Outputs
- Voltage: 24VDC
- Four (4) independently controlled 2.5A outputs:
- a) Four (4) Fail-Safe and/or Fail-Secure power outputs
- b) Any combination of the above
- Four (4) auxiliary power outputs (unswitched)
Outputs Ratings
- PTCs: 2.5A
Indicators (LED’s)
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: – 20° C to 70° C ( – 4° F to 158° F)
Relative Humidity
- Relative Humidity 85% +/- 5%
BTU/Hr (approx.):
- 87 BTU/Hr
Reviews
There are no reviews yet.