Altronix T1KE3F4D 4-Door Altronix/Kisi Access and Power Integration Kit

Altronix T1KE3F4D kit consists of Trove1 enclosure and TLU1 Altronix & Kisi backplane with 12VDC or 24VDC (factory set at 24VDC) @ 6A power supply/charger and four (4) PTC protected output access control module. This kit also accommodates one (1) Kisi Pro Controller for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

eFlow6NB Power Supply/Charger

Input

• Voltage: 120VAC, 60Hz, 3.5A
• Fusing: 5A / 250V

Output

• Voltage: 24VDC
• Current: 6A continuous
• Other: Overvoltage protection. Filtered and regulated

Battery Backup

• Capacity: 7AH/12VDC (Up to 2 within enclosure) 40AH/65AH (requires separate enclosure)
• Type: Sealed lead acid or gel type
• Fuse Rating: 10A @ 32V
• Failover: Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised: Latching or non latching
• EOL: 10K Resistor

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators LED

• Input: 120VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

ACM4CB Access Power Controller

Input

• Voltage: 24VDC from eFlow6NB
• Input Fuse: 10A / 32V

Outputs

• Voltage: 24VDC
• Four (4) independently controlled PTC outputs:
• a) Four (4) Fail-Safe and/or Fail-Secure power outputs
• Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above

Outputs Ratings

• PTCs: 2.5A

Indicators (LED)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 87 BTU/Hr