Altronix T1SPK34 kit consists of Trove1 enclosure and TSP1 Altronix & Suprema backplane with 12VDC or 24VDC (factory set at 24VDC) @ 6A power supply/charger, 12VDC voltage regulator, eight (8) fuse protected output dual voltage power distribution module and four (4) fuse protected output access control module. This kit also accommodates one (1) Suprema CoreStation module for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
Features
AL600ULXB Power Supply/Charger
Input
- Voltage: 115VAC, 60Hz, 3.5A max
- Fusing: 5A / 250V
Outputs
- Voltage: 12VDC or 24VDC selectable
- Current: 6A @ 12VDC or 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
Battery Backup
- Capacity: 7AH / 12VDC (up to 2 within enclosure); 40 AH / 65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
Supervision
- AC Failure: Form “C” contacts
- Battery: Form “C” contacts
Indicators LED
- Input: 115VAC is present
- DC Output: Powered
- Battery: Discharged or not connected
ACM4 Access Power Controller
Input
- Voltage: 24VDC from AL600ULXB
- Input Fuse: 10A / 32V
Outputs
- Voltage: 24VDC
- Four (4) independently controlled 2.5A outputs:
- a) Four (4) Fail-Safe and/or Fail-Secure power outputs
- b) Four (4) dry form “C” 5A rated relay outputs
- c) Any combination of the above
- Four (4) auxiliary power outputs (unswitched)
Outputs Ratings
- Fuses: 3A / 32V
Indicators (LED)
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
VR6 Voltage Regulator
Input
- Voltage: 24VDC from AL600ULXB
Output
- Voltage: 12VDC
- Current: 6A continuous
- Other: Surge suppression
Indicators (LED)
- Input: 24VDC is present
- Output: Powered
PDS8 Dual Input Power Distribution Module
Input
- Voltage: 12VDC from VR6 and 24VDC from AL600ULXB
- Input Fuse: 10A / 250V
Outputs
- Voltage: 12VDC and/or 24VDC
- Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Outputs Ratings
- Fuses: 3A/32V
Indicators (LED)
- DC Output: Eight (8) individual output LEDs
- Green: 12VDC
- Red: 24VDC
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: – 20° C to 70° C ( – 4° F to 158° F)
Relative Humidity
- Relative Humidity: 85% +/- 5%
BTU/Hr (approx.):
- 12VDC: 40 BTU/Hr
- 24VDC: 77 BTU/Hr
Reviews
There are no reviews yet.