Altronix T2PDK77F24S 24-Door Altronix/PDK Red™ Access and Power Integration Kit

Altronix T2PDK77F24S kit consists of Trove2 enclosure, TPD2 Pdk Red™/Altronix backplane with two (2) 24VDC @ 10A power supply/chargers, two (2) twelve (12) fused protected dual input/output access control modules, two (2) eight (8) fuse protected dual input/output power distribution modules and two (2) 12VDC voltage regulators. This kit also accommodates up to six (6) red4 modules for up to twenty-four (24) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

Two (2) eFlow104NB Power Supply/Chargers

Input

• Voltage: 120VAC, 60Hz, 9A
• Main Fuse: 6.5A / 250V

Output

• Voltage: 24VDC @ 10A
• Auxiliary: 1A (unswitched)
• Other: Overvoltage protection. Filtered and regulated

Battery Backup

• Type: Sealed lead acid or gel type
• Fuse Rating: 15A/32V
• Failover: Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised: Latching or non-latching
• EOL: 10K Resistor

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators LED

• AC Input: 120VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

Two (2) ACMS12 Dual Input Access Power Controllers

Input

• Voltage: First ACMS12 – 24VDC from first eFlow104NB
• Voltage: Second ACMS12 – 24VDC from second eFlow104NB
• Input Fuse: 15A / 32V

Outputs

• Voltage: 12VDC and/or 24VDC
• Twelve (12) independently controlled fused outputs:
• a) Fail-Safe and/or Fail-Secure power outputs
• Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above

Outputs Ratings

• Fuses: 3A/32V

Indicators (LED’s)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

VR6 Voltage Regulator

Input

• Voltage: 24VDC from eFlow104NB

Output

• Voltage: 12VDC
• Current: 6A continuous
• Other: Surge suppression

Indicators LED

• Input: 24VDC is present
• Output: Powered

Two (2) PDS8 Dual Input Power Distribution Modules

Input

• Voltage: 12VDC from VR6 and 24VDC from eFlow104NB
• Input Fuse: 10A / 32V

Outputs

• Voltage: 12VDC and/or 24VDC
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Outputs Ratings

• Fuses: 3A/32V

Indicators (LED’s)

• DC Output: Eight (8) individual output LEDs
• Green: 12VDC
• Red: 24VDC

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 290 BTU/Hr