Altronix T2SSK75F14D kit consists of Trove2 enclosure, TSS2 Lenel-S2 (S2 Security Platform) / Altronix backplane with one (1) 24VDC @ 10A power supply/charger, one (1) 12VDC @ 10A power supply/charger, two (2) PTC access power controllers and two (2) PTC power distribution modules. This kit also accommodates S2-INST Installation Kit For Lenel-S2 (S2 Security Platform) S2 Network Node for up to fourteen (14) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
Features
eFlow104NB Power Supply/Charger – 1
Input
- Voltage: 120VAC, 60Hz, 4.5A max
- Input Fuse: 6.3A / 250V
Outputs
- Voltage: 24VDC @ 10A
- Auxiliary: 1A (unswitched)
- Protection: Overvoltage protection. Filtered and regulated
eFlow102NB Power Supply/Charger – 2
Input
- Voltage: 120VAC, 60Hz, 3.5A max
- Input Fuse: 5A / 250V
Output
- Voltage: 12VDC @ 10A
- Auxiliary: 1A (unswitched)
- Protection: Overvoltage protection. Filtered and regulated
Both Power Supplies:
Battery Backup
Fire Alarm Disconnect
- Supervised: Latching or non latching
- EOL: 10K Resistor
Supervision
- AC Failure: Form “C” contacts
- Battery: Form “C” contacts
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge
Indicators LED
- Input: 120VAC is present
- DC Output: Powered
- Battery: Discharged or not connected
Two (2) PD8ULCB Power Distribution Modules
Input
- Voltage: 24VDC from eFlow104NB or 12VDC from eFlow102NB
Outputs
- Voltage: 24VDC or 12VDC
- Output PTCs: 2.5A
Indicators (LED)
- Green LED: DC Output
Two (2) ACM8CB Access Power Controllers
Input
- Voltage: 24VDC from eFlow104NB or 12VDC from eFlow102NB
- Input Fuse: 10A / 250V
Outputs
- Voltage: 24VDC or 12VDC
- Eight (8) 24VDC and eight (8) 12VDC independently controlled PTC outputs:
- a) Fail-Safe and/or Fail-Secure power outputs
- b) Auxiliary power outputs (unswitched)
- c) Any combination of the above
Outputs Ratings
- PTCs: 2.5A
Indicators (LED)
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
Environmental
Temperature
- Operating: 0° C to 50° C (32° F to 122° F)
- Storage: – 20° C to 70° C ( – 4° F to 158° F)
Relative Humidity
- Relative Humidity 85% +/- 5%
BTU/Hr (approx.):
- 191 BTU/Hr
Reviews
There are no reviews yet.