Altronix T3CVK7720D 20-Door Altronix/CDVI Access and Power Integration Kit

Altronix T3CVK7720D kit consists of Trove3 enclosure, TCV3 CDVI/Altronix backplane with two (2) 24VDC @ 10A power supply/chargers, two (2) 8-output PTC access power controllers, one (1) 4-output PTC access power controller and one (1) 8-output PTC power distribution module. Also featured is a rocker switch bracket with two (2) rocker switches. This kit also accommodate various combinations of CDVI Atrium A22K/A22NB/ADH10 boards for up to twenty (20) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

Two (2) AL1024ULXB2 Power Supply/Chargers

Input

• Voltage: 115VAC 60Hz, 4.2A max
• Main Fuse: 5A / 250V

Outputs

• Voltage: 24VDC
• Current: 10A @ 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

Battery Backup

• Capacity: 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts

Indicators LED

• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

Two (2) ACM8CB Access Power Controllers

Input

• Voltage: 24VDC from AL1024ULXB2
• Main Fuse: 10A / 250V

Outputs

• Voltage: 24VDC
• Eight (8) 24VDC independently controlled PTC outputs:
• a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above
• Output PTCs: 2.5A

Indicators (LED)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

ACM4CB Access Power Controller

Input

• Voltage: 24VDC from AL1024ULXB2
• Input Fuse: 10A / 32V

Outputs

• Voltage: 24VDC
• Four (4) independently controlled 2.5A outputs:
• a) Four (4) Fail-Safe and/or Fail-Secure power outputs
• b) Four (4) dry form “C” 5A rated relay outputs
• c) Any combination of the above
• Four (4) auxiliary power outputs (unswitched)

Outputs Ratings

• PTCs: 2.5A

Indicators (LED)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

PD8ULCB Power Distribution Module

Input

• Voltage: 24VDC from AL1024ULXB2

Outputs

• Voltage: 24VDC
• Eight (8) PTC protected outputs. 2.0A per output max
• Output PTCs: 2.5A

Indicators LED

• Green LED: DC Output

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 263 BTU/Hr