Altronix T3SK77724S kit consists of Trove3 enclosure and TSH3 Software House/Altronix backplane with three (3) 24VDC @ 10A power supply/chargers, two (2) twelve (12) fuse protected dual output access control modules, two (2) 12VDC 6A voltage regulators and two (2) sixteen (16) fuse protected dual output power distribution modules.
This kit also accommodates various combinations of Software House boards for up to twenty-four (24) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
Features
Three (3) AL1024ULXB2 Power Supply/Chargers
Input
- Voltage: 115VAC, 60Hz, 4.2A max
- Main Fuse: 5A / 250V
Output
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
Battery Backup
- Capacity: 7AH /12VDC (4 within enclosure), 40 AH / 65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
Supervision
- AC Failure: Form “C” contacts
- Battery: Form “C” contacts
Indicators LED
- Input: 115VAC is present
- DC Output: Powered
- Battery: Discharged or not connected
Two (2) ACMS12 Dual Input Access Power Controllers
Input
- Voltage: 12VDC from VR6 and 24VDC from AL1024ULXB2
- Input Fuse: 15A / 32V
Outputs
- Voltage: 12VDC and/or 24VDC
- Twelve (12) independently controlled fused outputs:
- a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
- b) Auxiliary power outputs (unswitched)
- c) Any combination of the above
Outputs Ratings
- Fuses: 3A/32V
Indicators (LED’s)
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
Two (2) VR6 Voltage Regulators
Input
- Voltage: 24VDC from AL1024ULXB2
Output
- Voltage: 12VDC
- Current: 6A continuous
- Other: Surge suppression
Indicators LED
- Input: 24VDC is present
- Output: Powered
Two (2) PDS16 Dual Input Power Distribution Modules
Input
- Voltage: 12VDC from VR6 and 24VDC from AL1024ULXB2
- Input Fuse: 15A / 32V
Outputs
- Voltage: 12VDC and/or 24VDC
- Any of the sixteen (16) power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Outputs Ratings
- Fuses: 3A/32V
Indicators (LED)
- DC Output: Sixteen (16) individual output LEDs
- Green: 12VDC
- Red: 24VDC
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: – 20° C to 70° C ( – 4° F to 158° F)
Relative Humidity
- Relative Humidity 85% +/- 5%
BTU/Hr (approx.):
- 327 BTU/Hr
Reviews
There are no reviews yet.