Bogen 4MN-P-DSP-PSU-CASE 4MN-P with Separate DSP and PSU, 25′ Speaker Cable, MP-3 Digital Audio Player

The 4MN-P-DSP-PSU-CASE from Bogen is a 4MN-P with separate DSP and PSU in Pelican travel case; includes 25′ speaker cable, MP-3 digital audio player, and MP-3 cable. Requires 110V power. The 4MN-P module use four MAD-1 drivers arrayed into a 2×2 configuration with each driver coupled to a waveguide. Standard rigging hardware is built into the module allowing line arrays (using up to eight modules) to be configured for longer throw requirements. Optional mounting brackets allow one module to be installed on a wall or ceiling, a tripod stand, or on a magnetic vehicle mount.

The rack mounted MN-PSU provide DC voltage for the MN-DSP and the built-in amplifiers in the 4MN-P modules. Two MN-PSU models are available. MN-PSU/8 will power one MN-DSP and up to four 2MN-P or two 4MN-P modules. The MN-PSU/16 will power one MN-DSP and up to four 4MN-P modules. Mains power is either 120 VAC or 240 VAC. The 4MN-P speakers require the outboard MN-DSP system controller and MN-PSU. The MN-DSP provides 1 balance line input and 1 stereo line input. Separate volume controls provided for each input and master output. The DSP output connects audio input on each speaker. Audio signal can be looped between speakers.