Bogen BOUTIQUE SG8 Scalable PAVA System Auxiliary Unit, 8 Zone

The BOUTIQUE SG8 from Bogen is a secondary global unit is an extension unit for BOUTIQUE-/VM4VM8 main controller. Up to 64 BOUTIQUE-/VM4VM8 or BOUTIQUE SG8 can be cascaded via full redundancy global-net.

The BOUTIQUE SG8 is capable of handling 1000W speaker load per zone and 2000W max. per BOUTIQUE SG8 unit. The BOUTIQUE SG8 extends the number of input and output contacts available in the system, including 9 monitored EVAC inputs triggered either by dry contact or relay, 8 logic control inputs and 8 relay control outputs. The two digital interfaces can connect up to 8 paging consoles or remote units for each, and be wired in a daisy chain or redundant loop. It is also equipped with a USB port for message or music files playing.

In accordance with EN54-16 and UL2572, all BOUTIQUE system components and peripherals are monitored, this monitoring extends from a paging microphone capsule to the end of loudspeaker lines. The speaker lines are monitored for short, open circuit and leakage. In addition, volume attenuators can be installed on a monitored speaker line. The BOUTIQUE SG8 is also an eco-friendly product with extremely low power consumption during standby mode.

Features

• Support up to 16,384 zones connected to 64 x BOUTIQUE-VM4/VM8/SG8 via global-net
• Control, management and monitoring via web browser
• Paging with priority management, event and bell scheduler
• USB interface for messages and music files
• Internal message storage for up to 90 minutes
• Both background music playing and paging can simultaneously proceed
• Easy integration with Terracom and IP-PBX via SIP protocol
• VoIP interface with standard SIP protocol
• Paging source can be programmed with 1~99 level priority
• Enhanced loudspeaker line surveillance for AB-zoned installation
• Extremely low power consumption during standby mode (4W)
• Volume attenuators can be installed on monitored speaker lines
• 9 monitored EVAC inputs, 8 logic control inputs, 8 relay control outputs
• 1 Fault relays & 1 EVAC relay output
• 2 digital paging and control console interfaces
• 1 USB 2.0 port
• Third party control via RS232 or Ethernet