The BOUTIQUE VM850 from Bogen is a controller offer 8 monitored speaker zones respectively. Each controller can cascade with up to 31 BOUTIQUE-SL8 secondary units via local digilink, and up to 64 x BOUTIQUE-VM8 via global-net. This will then extend as little as 4 monitors A/B speaker zones to a large networked system of up to 16,384 zones. The BOUTIQUE-SL8 is linked to the main controller via STP CAT5/6 cable with shielded RJ45 connector (max. length 100M between units); and the BOUTIQUE-SG8 is linked to BOUTIQUE-VM8 via STP CAT5/6 cable (max. length 100m between units), multi-mode (2 km) and single-mode (20 km) fiber optics or even longer distance.
The BOUTIQUE system can be installed and configured with ease of operation, including easy setup and replacement from LCD front panel. Operational versatility such as volume, PEQ, audio routing, monitor and control, event and bell scheduler, paging with priority management (1~99 priority level) etc. can be configured by a dedicated web browser. In addition, the BOUTIQUE system has full digital audio mixing and internal message and music storage for up to 90 minutes, and a USB interface to play G.711, G.722, G.726, G.727, MP3 and WAV files.
In accordance with EN54-16 and UL2572, all BOUTIQUE system including paging microphones and loudspeaker lines provides full monitoring and fault reports. Multiple volume attenuators can be installed on monitored speaker lines without loopback cable. The main controller is also an eco-friendly product with extremely low power consumption during standby mode (6.5W).
Features
- Support as little as 4 zones to a large 16,384 zones using global network of BOUTIQUE-VM8
- 500W high efficiency Class-D amplifier built-in
- Full DSP system with superior audio quality
- Control, management and monitoring via web browser
- Both background music playing and paging can be simultaneously proceeded
- IP based music streaming and paging over LAN/WAN
- Easy integration with TerraCom, TerraManager and IP phone via SIP protocol
- Internet radio receiver built-in
- Low cost 2 channel switching amplifier architecture
- VAT volume attenuators can be installed on monitored speaker lines without loopback cable
- Integrated ambient noise sensing for auto audio level
- 2.2” LCD colour display for system status and configuration setting
- Third party control via RS232 or Ethernet
Reviews
There are no reviews yet.