Comnet CNGE8MS-DIN 8-Port 10/100/1000Mbps Hardened Managed Ethernet Switch

The Comnet CNGE8MS-DIN is an 8-port Managed Ethernet Switch designed to reliably operate in harsh, environmentally challenging applications. It features eight (8) 10/100/1000BASE-T(X) ports. Exclusive to Comnet is X-Ring+, a feature that protects the network from interruptions or temporary malfunctions with fast recovery technology. Legacy ring allows the switch to be used in an existing ring of Comnet X-Ring enabled switches. Redundant DC inputs are included for uninterrupted operation in the event of a power supply failure. The electrical ports support the 10/100/1000Mbps Ethernet IEEE802.3 protocol, and auto-negotiating and auto-MDi/MDiX features are provided. These network-managed layer 2 switches are electrically compatible with any IEEE802.3 compliant Ethernet device. The CNGE8MS-DIN is DIN-rail or wall-mountable.

Features

• 8 10/100/1000T(X) Ports
• IGMP v1/v2 (IGMP snooping support) for filtering multicast traffic & Port Trunking for ease of bandwidth management
• STP/RSTP/MSTP supported
• Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
• IEC 62439-2 MRP (Media Redundancy Protocol)
• Operating Temperature: -40˚ C to +75˚ C
• Fastest Redundant Ethernet Ring: Comnet X-Ring+. Recovery time <30ms, with > 250 switches within the ring
• Web-based and Telnet configuration with support for network monitoring through Comnet eConsole utility
• Supports LLDP (Link Layer Discovery Protocol)
• Event notification through Syslog, RMON, SNMP trap, and Relay Output
• Port lock to prevent access from unauthorized MAC address
• SNMP v1/v2c/v3 for secure network management
• IPV6 internet protocol (latest version)
• Provides SSH/SSL protocol for enhanced network security
• Rigid aluminum housing design provides for DIN-Rail or wall mounting