ETS SM5-LE2 1 SM1-LE2 microphone, SM2 interface

The SM5-LE2 from ETS is a 1 SM1-LE2 microphone, SM2 interface. The SM1-LE2 is low cost, high performance, omni-directional, pre-amplified microphone for fixed location security applications. 25’ pickup pattern in all directions. Built in limiter circuit automatically lowers the output level during loud sound intervals. Selectable Hi cut and low cut filters significantly reduce background noise. ABS
enclosure mounts on any surface. Connects directly to our switcher/mixer/amplifiers or use one of our many
interface products to make fast and clean connections to DVRs or remote monitoring equipment.

The SM2 is a single channel interface for use with all SM1 series microphones. It provides a convenient way of supplying
power to the SM1, installer friendly termination of the cable runs and a standard RCA or 3.5mm audio output connector. The SM2 easily connects to recording equipment such as DVRs, I/P cameras and audio recorders. Note the audio output signal of the SM2 is “line level” (0dbm).

SM1-LE2 Microphone Specifications

• Omni-directional 25’ pickup pattern
• Low noise MOSFET pre-amplifier
• 500Hz-13Khz Frequency response
• Jumper selectable hi-cut/low-cut filters limit
  frequency response to 900-6khz significantly
  reducing background noise
• Jumper selectable volume range: “Line level” (0db) or “Microphone level” (-30db)
• Adjustable gain in both volume ranges
• 100 Ohm unbalanced output
• Internal peak limiter circuit (.5 sec response)
• 3 position Euro-style connector makes cable termination fast and clean
• Reverse polarity protected
• Power: 12 to 24VDC @ 10mA
• On-board voltage regulator and RFI filtering
• S/N ratio: more than 60DB
• Sensitivity –45DB
• Industrial temperature range –40 to 105C
• ABS enclosure mounts on any surface
• Dimensions: L4.0 x W2.4 x h2.2

SM2 Interface Adapter Specifications

• Standard RCA or 3.5mm (please specify) jack for connection to DVRs, etc.
• 3 position Euro-style connector makes cable termination fast and clean
• LED power indicator
• Power:12 VDC @ 10mA
• Reverse polarity protected and fused