The Monochrome (B&W) Bullet camera shall be a Weldex WDB-7007SS. The camera shall include a mounting bracket. The camera shall feature a 1/3″ interline transfer CCD pickup device. The camera shall produce a horizontal resolution of 430 lines and a signal-to-noise ratio of 50dB or greater. The camera’s Automatic Gain Control (AGC) shall provide clear images in low light conditions. The camera shall display useable monochrome pictures at a scene illumination of 0.03 lux (f/1.2). The camera synchronization shall be internal. The video signal shall be transmitted up to 900′ over coaxial cable (RG-6). The camera shall have a BNC video output connector. The camera shall include a fixed 3.6mm lens with options of a 8 other lenses ranging from 2.9mm to 16mm that are field interchangeable. The camera will feature an Electronic Light Control (ELC) (equivalent to continuous variable shutter speed between 1/60 sec. and 1/100,000 sec.). The power source shall be regulated 12VDC, 60Hz (120mA). The camera shall have a barrel plug for power input. The camera shall be enclosed in a weatherproof aluminum housing with a glass window for image viewing. The camera shall further have weather proof seals at the housing seam and cable input. The housing shall feature a standard 1/4″x20 threaded mounting hole for the pivot stud mount (supplied). The assembled Bullet-style housing shall provide limited protection for the camera and lens from dust and water. The camera housing shall be intended for outdoor and indoor use and have a rating of NEMA Type 4. The camera shall withstand a temperature of -4 degrees F to +158 degrees F. The camera’s dimensions shall not exceed 0.75″ Diameter x 2.25″ Length.
PDF Spec Sheet