AL1012ULACMCBJ

$341.04

AL1012ULACM-CB in BC600 enclosure

SKU: AL1012ULACMCBJ Category:
 

Description

The AL1012ULACMJ / AL1012ULACMCBJ converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. These power outputs can be converted to dry form “C” contacts (AL1012ULACMJ only). Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. These units will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. The units are designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock/accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Features

  • Eight (8) independently controlled PTC protected outputs
  • Class 2 Rated power limited outputs
  • 12VDC @ 10 amp supply current
  • Eight (8) auxiliary power outputs (unswitched)
  • Input 115VAC 60Hz rated @ 1.9 amp
  • ACM8 board main fuse is rated at 10 amp
  • Filtered and electronically regulated outputs (built-in power supply)
  • Short circuit and thermal overload protection
  • Red LEDs indicate outputs are triggered (relays energized)
  • Green LED indicates when FACP disconnect is triggered
  • Built-in charger for sealed lead acid or gel type batteries
  • Automatic switch over to stand-by battery when AC fails
  • Zero voltage drop when unit switches over to battery backup (AC failure condition)
  • AC fail supervision (form “C” contact)
  • Battery fail and battery presence supervision (form “C” contact)
  • AC input and DC output LED indicators
  • Enclosure accommodates up to two (2) 12AH batteries

PDF Spec Sheet

Additional information

Manufacturer

Reviews

There are no reviews yet.

Be the first to review “AL1012ULACMCBJ”