Description
Altronix HubSat43Di Passive UTP Transceiver Hub w/Integral Isolated Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC electronically isolated fuse protected outputs with surge suppression. Optionally, the HubSat3i can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat4i provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Features
- Primary fuse (internal) is rated at 3.5 amp/250V
- Individually selectable 24VAC or 28VAC power outputs with OFF position
- Unit provides up to 1 amp max. per channel not to exceed a total of 8 amp (100VA) maximum current
- Class 2 Rated power limited outputs
- PTC protected outputs are rated @ 1 amp per channel
- Surge suppression
- Electronically isolated camera power
- Four (4) channels of video over twisted pair up to a distance of 750 ft. (228.6m) per channel
- Four (4) 75 ohm video outputs
- RS422/RS485 data inputs
- Four (4) individual power LED indicators
