Description
Altronix HubWay163D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 16 camera channels in a space saving 1U EIA 19″ rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5or higher structured cable back to the HubWay16D. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Features
- Illuminated master power disconnect circuit breaker with manual reset
- IEC 320 – 3-wire grounded line cord (detachable)
- Unit can be rack, wall or shelf mounted
- 1U EIA 19″ rack mount chassis
- Individually selectable 24VAC or 28VAC power outputs with OFF position
- Unit provides up to 1 amp max. per channel not to exceed a total of 10 amp (300VA) maximum current
- Class 2 Rated power limited outputs
- PTC protected outputs are rated @ 1 amp per channel
- Surge suppression
