Altronix EBRIDGE100RM Single Port EoC or Long Range Ethernet Receiver, 100Mbps, Requires Compatible Transceiver

eBridge100RM is a versatile dual solution Ethernet receiver/media converter which transmits data at 100Mbps full duplex and power over Coax cable or extended CAT5e cable in a PoE+ compliant format. The eBridge100RM is powered via a PoE midspan such as the Altronix NetWay series or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge100TM/eBridge100ST transceiver which in turn passes this power to an enabled IP Camera/device. These plug and play units facilitate cost effective
solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over existing coax or structured cable.

Features

• Powered by midspan or endspan
• PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
• Connectivity: RJ45, auto-crossover
• Wire type: 4-pair CAT5
• Distance: up to 500m
• Speed: 10/100BaseT, half/full duplex, auto negotiation
• PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by eBridge100TM. Power provided by eBridge100RM to eBridge100TM by PoE protocol
• Throughput is rated to pass 100mbps of data at distances up to 500m
• Distance: Coax 300m for power delivery
• Connectivity: BNC, RG-59/U or similar
• Distance: CAT5e up to 500m, Coax 300m for power delivery
• eBridge100RM and eBridge100TM: Yellow – PoE ON (by respective RJ45 jack)
• eBridge100RM and eBridge100TM: Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active
• -20ºC to 49ºC (-4ºF to 120.2ºF)
• -30ºC to +70ºC (-22ºF to 158ºF)
• Humidity: 20 to 85%, non-condensing
• Auto detection and protection of legacy non-PoE cameras/devices