Altronix EFLOW104NBV Power Supply Charger, Single Output, 24VDC @ 10A, Aux Output, FAI, LinQ2 Ready, 220VAC, Board

Altronix eFlow104NBV is a power supply/charger converts a 220VAC (working range 198VAC – 256VAC), 50/60Hz input to a 24VDC @ 10A output.

Input Rating

• Input 220VAC (working range 198VAC – 256VAC), 50/60Hz, 2.7A

Output

• 24VDC output
• 10A continuous supply current
• Aux. output rated @ 1A (unswitched)
• Overvoltage protection
• Filtered and electronically regulated outputs

Battery Backup

• Built-in charger for sealed lead acid or gel type batteries
• Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption

Fire Alarm Disconnect

• Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger

Supervision

• AC fail supervision (form “C” contacts)
• Notification trigger is selectable for 30 seconds (factory set) or 2 hours
• Battery fail and presence supervision (form “C” contacts)
• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge

Electrical

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Visual Indicators

• Green AC Power LED indicates 220VAC present
• AC input and DC output LED indicators

Additional Features

• Short circuit and overload protection