Altronix eFlow6NBV is a power supply/charger converts a 220VAC (working range 198VAC – 256VAC), 50/60Hz input into a single 12VDC or 24VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
Features
Input Rating
- Input 220VAC (working range 198VAC – 256VAC), 50/60Hz, 2.5A
Output
- 12VDC or 24VDC selectable output
- 6A continuous supply current
- Aux. output rated @ 1A (unswitched)
- Overvoltage protection
- Filtered and electronically regulated outputs
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption
Fire Alarm Disconnect
- Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
Supervision
- AC fail supervision (form “C” contacts)
- Notification trigger is selectable for 30 seconds (factory set) or 2 hours
- Battery fail and presence supervision (form “C” contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge
Electrical
Temperature:
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: – 20° C to 70° C ( – 4° F to 158° F)
- Relative Humidity 85% +/- 5%
BTU/Hr (approx.):
- 12VDC: 37 BTU/Hr
- 24VDC: 74 BTU/Hr
Visual Indicators
- Green AC Power LED indicates 120VAC present
- AC input and DC output LED indicators
Additional Features
- Short circuit and overload protection
Reviews
There are no reviews yet.