Altronix MAXFIT716AP 16 Door Fused Access Power Controller Kit – BC750 enclosure with AL1024ULXB2, (2) ACM8, PD16W

Altronix MaxFit716AP Access Power Controller distributes and switches power to access control systems and accessories. It converts a 115VAC, 60Hz input into sixteen (16) distributed 24VDC fuse protected outputs and sixteen (16) independently controlled 24VDC fuse protected relay outputs. Fail-Safe/Fail-Secure power outputs may be converted to dry form “C” contacts. Relays are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) relay outputs.

Features

AL1024ULXB2 Power Supply/Charger

Input

• Voltage: 115VAC, 60Hz, 4.2A max
• Input Fuse: 5A / 250V

Outputs

• Voltage: 24VDC
• Current: 10A @ 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

Back-up Battery (not included)

• Type: Sealed lead acid or gel type
• Fuse Rating: 15A/32VDC
• Failover: Upon AC loss, instantaneous

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts

Indicators (LED)

• AC Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

PD16W Power Distribution Module

Input

• Voltage: 24VDC from AL1024ULXB2

Outputs

• Voltage: 24VDC
• Sixteen (16) fuse protected outputs
• 3.5A per output max

Output Fuses

• 3.5A/250V

Indicators (LED)

• Green LED: DC Output

Two (2) ACM8 Dual Input Access Power Controllers

Input

• Voltage: 24VDC from AL1024ULXB2
• Main Fuse: 10A / 32V

Outputs

• Voltage: 24VDC
• Eight (8) independently controlled fused outputs:
• a) Fail-Safe and/or Fail-Secure power outputs
• Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• Output Fuses: 3.5A / 32VDC

Indicators (LED)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

Temperature

• Operating: 0° C to 50° C (32° F to 122° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 145 BTU/Hr