Altronix NETWAY16V Midspan Injector, 16 Port, 10/100, PoE/PoE+, 300W, 220VAC

Altronix NetWay16V Midspans provide power and pass data (video) for PoE compliant cameras/devices. Sixteen ports in a space saving 1U EIA 19″ rack mount chassis. Cameras/devices may be located up to 100m from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m. for a total range of up to 200m. A maximum range of 600m. is possible using multiple repeaters, based on camera/device port requirement. NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras by utilizing NetWay1512 or NetWay3012 adapters.

Features

Input

• 220VAC 50/60Hz, 2.5A
• Primary fuse (internal) is rated at 5A/250V

Power

• Unit provides up to 30W max. full power per port
• Total power: 300W
• IEEE 802.3af (PoE) and IEEE 802.3at (PoE +) compliant
• Short circuit protection

Functions

• Auto detection and protection of legacy non-PoE cameras/edge devices

Features

• Easy plug and play installation
• Safe and cost effective power distribution over CAT5/5E/6 LAN infrastructure
• Automatic detection and protection of legacy non-PoE cameras
• Port status LED indicators
• Illuminated master power disconnect circuit breaker with manual reset (switch)
• IEC 320 – 3-wire grounded line cord (detachable)

Temperature

• Operating: – 20° C to 40° C (-4° F to 104° F)
• Storage: – 20° C to 70° C (-4° F to 158° F)
• Relative Humidity 85% +/- 5%
• BTU/Hr. (approx.): 154 BTU/Hr
• System AC input VA requirement: 550VA

Operating Altitude

• – 304.8 to 3,048m ( – 1,000 to 10,000 ft.)