Altronix NetWay4E1LWPX PoE+ Outdoor Hardened Switch provides one (1) 1Gb SFP (Fiber) port and four (4) PoE+ (30W) ports passing data for PoE/PoE+ compliant devices. Cameras/edge devices may be located up to 100m from the unit. NetWay4E1LWPX is designed to support a single 12V LiFePO4 (Lithium Iron Phosphate) battery for high storage and charge/discharge cycle life reliability.
Features
Input
- 115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A
Power Output
- Four (4) 10/100/1000 Mbps Ethernet ports rated at 30W each (limited to 75W total power)
- IEEE 802.3af, 802.3at compliant
- Integral surge protection
Fiber Port
- One (1) Gigabit SFP port
- Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included)
Ethernet Ports
- Four (4) 10/100/1000 Mbps ports
- Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5 or better structured cable
- Distance: up to 100m
- Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation
Battery Backup
- Built-in charger for 12V LiFePO4 (Lithium Iron Phosphate) battery.
Caution: Do not use lead acid or gel type batteries - Automatic switch over to stand-by battery when AC fails
Environmental
Operating Ambient Temperature:
- 60W: – 40ºC to 75ºC (- 40°F to 167°F);
75W: – 40ºC to 70ºC (- 40°F to 158°F);
(if LiFePO4 battery is installed within enclosure, the temperature range is 0°C to 40°C (32°F to 104°F) - Relative Humidity: 85%, +/– 5%
- Storage Temperature: – 40ºC to 85ºC (– 40ºF to 185ºF)
- Operating Altitude: – 304.8 to 2,000m
LEDs
- Individual PoE On LEDs for each port
- Individual IP Link status, 100/1000 Base-T/active LEDs for each port
- ALOS LED indicates fiber connection for SFP port
- Heartbeat LED indicates proper operation of the unit
Mechanical
- NEMA4/4X, IP66 Rated enclosure for outdoor use
- Accommodates one (1) 12V LiFePO4 (Lithium Iron Phosphate) battery.
Note: LiFePO4 batteries have a restricted temperature range (0°C to 40°C)
Reviews
There are no reviews yet.