Altronix NetWay8MV Managed Midspans provide power and pass data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/ device port requirement. NetWay Managed Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.
Features
Input
- 220VAC 60Hz, 1.5A
Power
- Eight (8) ports of cameras/edge devices over ethernet (CAT5) cable up to a distance of 100m per port
- Unit provides up to 30W max. full power per port
- Total power: 150W
- IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) compliant
- Short circuit protection
Functions
- Programmable PoE shutdown for each port. Utilized to reset cameras/edge devices
- Auto detection and protection of legacy non-PoE cameras/edge devices
Features
- LAN or laptop connection enables programming of PoE shutdown and port monitoring
- User interface
- Illuminated master power disconnect circuit breaker with manual reset (switch)
- Individual port status LEDs
- IEC 320 – 3-wire grounded line cord (detachable)
Temperature
Operating:
- UL60950-1: – 20° C to 40° C ( – 4° F to 104° F)
- UL294: – 20° C to 49° C ( – 4° F to 120.2° F)
Storage:
- – 20° to 70° C ( – 4° F to 158° F)
- Relative Humidity 85% +/- 5%
- BTU/Hr. (approx.): 77 BTU/Hr
- System AC input VA requirement: 330VA
Operating Altitude
- – 304.8 to 3,048m



















Reviews
There are no reviews yet.