Altronix R1002ULADA Rack Mountable NAC Power Extender, 2 Class A or 4 Class B Outputs

Altronix R1002ULADA is a space-saving 10A remote power supply/battery charger for fire signaling applications such as Notification Appliance Circuits expansion (strobes and
horns) meeting ADA requirements. The rack mount drawer configuration is designed to be deployed where wall space is limited or may not be an option. R1002UALDA may be
connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). This unit delivers electronically regulated and filtered 24 volt power to Class B or Class A NAC loop circuits.
The 10A max. alarm current can be divided between the four (4) outputs for powering NAC devices. All outputs may be programmed for Input to Output Follower Mode (output will follow input). In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs.

Features

Input

Voltage:

• 120VAC, 60Hz, 5A
• Two (2) Class A or two (2) Class B inputs
• Two (2) NC dry contact trigger inputs

Input Ratings (INP1 and INP2):

• 8-30VDC 6.5mA max from FACP
• 12V 6.5mA, 24V 6.5mA from FACP

Output

Voltage:

• 24VDC power-limited outputs

Current:

• 10A max. total alarm current
• 2.5A max. current per output

Auxiliary:

• 1A

Other:

• Thermal and short circuit protection with auto reset
• Filtered and regulated outputs

Programmable Supervised Indicating Circuit Outputs:

• Four (4) Class B, or Two (2) Class A, or
• One (1) and Two (2) Class B

Back-up Battery

• Built-in charger for sealed lead acid or gel type batteries
• Automatic switchover to stand-by battery when AC fails
• Zero voltage drop when switching over to battery backup
• (Batteries are sold separately)

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts

Indicators (LED)

• AC Power (Green): Input voltage is present
• DC Output (Red): Powered
• Logic Board (Red and Green): Output status

Special Features

• 2-wire horn/strobe Sync mode allows audible notification appliances (horns) and visual notification appliances (strobes) to be silenced/deactivated at the same time
• Sync protocols include Potter/Amseco, Gentex®, System Sensor®, and CooperWheelock®
• Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit)
• Compatible with 12VDC or 24VDC fire panels
• Output loop supervision steered to Input 1 or Input 2
• Signal circuit trouble memory (helps identify intermittent loop problems)
• Common trouble input and output for external trouble signals tie-in
• Ground fault detection

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70°C ( – 4° F to 158° F)
• Relative Humidity 85% +/- 5%
• BTU/Hr (approx.): 31 BTU/Hr