Altronix T1KE34D 4-Door Altronix/Kisi Access and Power Integration Kit – Trove1LU1 with AL600ULXB, ACM4CB

Altronix T1KE34D kit consists of Trove1 enclosure and TLU1 Altronix & Kisi backplane with 12VDC or 24VDC (factory set at 24VDC) @ 6A power supply/charger and four (4) PTC protected output access control modules. This kit also accommodates various combinations of Kisi boards for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

AL600ULXB Power Supply/Charger

• Input
• Voltage: 115VAC, 60Hz, 3.5A max
• Input Fuse: 5A / 250V
• Outputs
• Voltage: 12VDC or 24VDC selectable
• Current: 6A @ 12VDC or 24VDC continuous max
• Other: Filtered and regulated
• Battery Backup (not included)
• Capacity: 7AH/12VDC (Up to 2 within enclosure); 12AH/12VDC (requires separate enclosure); 40 AH/65 AH (requires separate enclosure)
• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous
• Supervision
• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Indicators LED
• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

ACM4CB Access Power Controller

• Input
• Voltage: 24VDC from AL600ULXB
• Input Fuse: 10A / 32V
• Outputs
• Voltage: 24VDC
• Four (4) independently controlled 2.5A outputs:
  a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
  b) Any combination of the above
• Four (4) auxiliary power outputs (unswitched)
• Outputs Ratings
• PTCs: 2.5A
• Indicators (LED’s)
• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

• Temperature
• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)
• Relative Humidity
• Relative Humidity 85% +/- 5%
• BTU/Hr (approx.):
• 87 BTU/Hr