Altronix T1SAK34 4-Door Altronix/Salto Access and Power Integration Kit – Trove1SA1 with AL600ULXB, PDS8, VR6, ACM4

Altronix T1SAK34 kit consists of Trove1 enclosure, TSA1 Salto/Altronix backplane with one (1) 12VDC or 24VDC @ 6A power supply/charger, one (1) fused access power controller, one dual input power distribution module and one (1) voltage regulator. This kit also accommodates up to two (2) Salto CU42E0, CU4200 or CU4EB8 modules for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

AL600ULXB Power Supply/Charger

• Input
• Voltage: 115VAC, 60Hz, 3.5A max
• Fusing: 5A / 250V
• Outputs
• Voltage: 12VDC or 24VDC selectable
• Current: 6A @ 12VDC or 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

Battery Backup (not included)

• Capacity: 7AH / 12VDC (up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure)
• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts

Indicators LED

• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

PDS8 Dual Input Power Distribution Module

• Input
• Voltage: 12VDC from VR6 and 24VDC from AL600ULXB
• Main Fuse Rating: 10A / 32V
• Output
• Voltage: 12VDC and/or 24VDC
• Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing
• Outputs Ratings
• Fuses: 3A / 32V
• Indicators (LED)
• DC Output: Eight (8) individual output LEDs
• Green: 12VDC
• Red: 24VDC

VR6 Voltage Regulator

• Input
• Voltage: 24VDC from AL600ULXB
• Output
• Voltage: 12VDC
• Current: 6A continuous
• Other: Surge suppression
• Indicators (LED)
• Input: 24VDC is present
• Output: Powered

ACM4 Access Power Controller

• Input
• Voltage: 24VDC from AL600ULXB
• Fusing: 10A / 32V
• Output
• Voltage: 24VDC
• Four (4) independently controlled 2.5A outputs:
  a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
  b) Four (4) dry form “C” 5A rated relay outputs.
  c) Any combination of the above
• Four (4) auxiliary power outputs (unswitched)
• Outputs Ratings
• Fuses: 3A / 32VDC.
• Indicators (LED)
• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

• Temperature
• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)
• Relative Humidity
• Relative Humidity 85% +/- 5%
• BTU/Hr (approx.):
• 12VDC: 40 BTU/Hr
• 24VDC: 77 BTU/Hr