Altronix T1SAK34D 4-Door Altronix/Salto Access and Power Integration Kit

Altronix T1SAK34D kit consists of Trove1 enclosure, TSA1 Salto/Altronix backplane with one (1) 12VDC or 24VDC @ 6A power supply/charger, one (1) PTC access power controller, one dual input PTC power distribution module and one (1) voltage regulator. This kit also accommodates up to two (2) Salto CU42E0, CU4200 or CU4EB8 modules for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

AL600ULXB Power Supply/Charger

Input

• Voltage: 115VAC, 60Hz, 3.5A max
• Fusing: 5A / 250V

Outputs

• Voltage: 12VDC or 24VDC selectable
• Current: 6A @ 12VDC or 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

Battery Backup

• Capacity: 7AH/12VDC (Up to 2 within enclosure) 40AH/65AH (requires separate enclosure)
• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts

Indicators LED

• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

PDS8CB Dual Input Power Distribution Module

Input

• Voltage: 12VDC from VR6 and 24VDC from AL600ULXB
• Input PTC: 9A

Outputs

• Voltage: 12VDC and/or 24VDC
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Outputs Ratings

• PTCs are rated 2.5A

VR6 Voltage Regulator

Input

• Voltage: 24VDC from AL600ULXB

Output

• Voltage: 12VDC
• Current: 6A continuous
• Other: Surge suppression

Indicators LED

• Input: 24VDC is present
• Output: Powered

ACM4CB Access Power Controller

Input

• Voltage: 24VDC from AL600ULXB
• Input Fuse: 10A/32V

Outputs

• Voltage: 24VDC
• Four (4) 24VDC independently controlled PTC outputs:
• a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above
• Output PTCs: 2.5A

Indicators LED

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 12VDC: 40 BTU/Hr
• 24VDC: 77 BTU/Hr