Altronix T2M7XK1D 8-Door Altronix/Mercury Access and Power Integration Kit – Trove2M2 with eFlow104NB, VR6, ACMS8CB, PDS8CB, RSB1

Altronix T2M7XK1D is a 8-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2M7XK1D accommodates one (1) Intelligent Dual Reader Controller and three (3) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications.

*Also compatible with these authentic Mercury partners: AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt.

Features

eFlow104NB Power Supply/Charger

• Input
• Voltage: 120VAC, 60Hz, 4.5A max
• Input Fuse: 6.3A / 250V
• Output
• Voltage: 24VDC @ 10A
• Auxiliary: 1A (unswitched)
• Protection: Overvoltage protection. Filtered and regulated
• Battery Backup (not included)
• Type: Sealed lead acid or gel type
• Fuse Rating: 15A @ 32VDC
• Failover: Upon AC loss, instantaneous
• Fire Alarm Disconnect
• Supervised: Latching or non latching
• EOL: 10K Resistor
• Supervision
• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge
• Indicators LED
• AC Input: 120VAC is present
• DC Output: 24VDC is present
• Battery: Discharged or not connected

VR6 Voltage Regulator

• Input
• Voltage: 24VDC from eFlow104NB
• Output
• Voltage: 12VDC
• Current: 6A continuous
• Other: Surge suppression
• Indicators (LED)
• Input: 24VDC is present
• Output: Powered

ACMS8CB Dual Input Access Power Controller

• Input
• Voltage: 24VDC from eFlow104NB
• Input PTC: 9A
• Outputs:
• Voltage: 24VDC
• Eight (8) 24VDC independently controlled PTC outputs.
  a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
  b) Auxiliary power outputs (unswitched)
  c) Any combination of the above
• Output: PTCs 2.5A
• Indicators (LED)
• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

PDS8CB Dual Input Power Distribution Module

• Input
• Voltage: 12VDC from VR6 and 24VDC from eFlow104NB
• Input PTC: 9A
• Outputs
• Voltage: 12VDC and/or 24VDC
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing
• Outputs Ratings
• PTCs: 2.5A
• Indicators (LED)
• DC Output: Eight (8) individual output LEDs
• Green: 12VDC
• Red: 24VDC

Environmental

• Temperature
• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)
• Relative Humidity
• Relative Humidity 85% +/- 5%
• BTU/Hr (approx.):
• 145 BTU/Hr