Altronix T2PHK7524 24-Door Altronix/Openpath Access and Power Integration Kit with Fused Outputs

Altronix T2PHK7524 kit consists of Trove2 enclosure, TCV2 Openpath/Altronix backplane with one (1) 24VDC @ 10A and one (1) 12VDC @ 10A power supply/charger, two (2) twelve (12) fuse protected output dual input access control modules and one (1) sixteen (16) fused output dual input power distribution module. This kit also accommodates up to one (1) Openpath Core, two (2) Elevator Board, three (3) 4-Port or 8-Port modules for up to sixteen (16) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

AL1024ULXB2 Power Supply/Charger – 1

Input

• Voltage: 115VAC, 60Hz, 4.2A
• Main Fuse: 5A / 250V

Output

• Voltage: 24VDC
• Current: 10A @ 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

AL1012ULXB Power Supply/Charger – 2

Input

• Voltage: 115VAC, 60Hz, 2.6A max
• Main Fuse: 5A / 250V

Output

• Voltage: 12VDC
• Current: 10A @ 12VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

Both Power Supplies

IBattery Backup

• Capacity: 12AH/12VDC (2 within enclosure); 40 AH / 65 AH (requires separate enclosure)
• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts

Indicators LED

• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

Two (2) ACMS12 Dual Input Access Power Controllers

Input

• Voltage: 24VDC from AL1024ULXB2 and 12VDC from AL1012ULXB
• Input Fuse: 15A / 32V

Outputs

• Voltage: 12VDC and/or 24VDC
• Twelve (12) independently controlled fused outputs:
• a) Fail-Safe and/or Fail-Secure power outputs
• Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above

Outputs Ratings

• Fuses: 3A/32V

Indicators (LED’s)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

PDS16 Dual Input Power Distribution Module

Input

• Voltage: 12VDC from AL1012ULXB and 24VDC from AL1024ULXB2
• Input Fuse: 15A / 32V

Outputs

• Voltage: 12VDC and/or 24VDC
• Any of the sixteen (16) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Outputs Ratings

• Fuses: 3A/32V

Indicators (LED)

• DC Output: Sixteen (16) individual output LEDs
• Green: 12VDC
• Red: 24VDC

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 290 BTU/Hr