Altronix T2PHK7524D 24-Door Altronix/Openpath Access and Power Integration Kit with Fused Outputs

Altronix T2PHK7524D kit consists of Trove2 enclosure, TCV2 Openpath/Altronix backplane with one (1) 24VDC @ 10A and one (1) 12VDC @ 10A power supply/charger, two (2) twelve (12) PTC protected output dual input access control modules and one (1) sixteen (16) output dual input PTC power distribution module. This kit also accommodates up to one (1) Openpath Core, two (2) Elevator Board, three (3) 4-Port or 8-Port modules for up to sixteen (16) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

AL1024ULXB2 Power Supply/Charger – 1

Input

• Voltage: 115VAC, 60Hz, 4.2A
• Fusing: 5A / 250V

Output

• Voltage: 24VDC
• Current: 10A @ 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

AL1012ULXB Power Supply/Charger – 2

Input

• Voltage: 115VAC, 60Hz, 2.6A
• Fusing: 5A / 250V

Output

• Voltage: 12VDC
• Current: 10A @ 12VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

Both Power Supplies

IBattery Backup

• Capacity: 12AH/12VDC (2 within enclosure); 40 AH / 65 AH (requires separate enclosure)
• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts

Indicators LED

• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

Two (2) ACMS12CB Dual Input Access Power Controllers

Input

• Voltage: 24VDC from AL1024ULXB2 and 12VDC from AL1012ULXB
• Input PTC: 9A

Outputs

• Voltage: 12VDC and/or 24VDC
• Twelve (12) independently controlled PTC outputs:
• a) Fail-Safe and/or Fail-Secure power outputs
• Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above

Outputs Ratings

• PTCs: 2.5A

Indicators (LED’s)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

PDS16CB Dual Input Power Distribution Module

Input

• Voltage: 12VDC from AL1012ULXB and 24VDC from AL1024ULXB2
• Input PTCs: 9A

Outputs

• Voltage: 12VDC and/or 24VDC
• Any of the sixteen (16) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Outputs Ratings

• PTCs: 2.5A

Indicators (LED)

• DC Output: Sixteen (16) individual output LEDs
• Green: 12VDC
• Red: 24VDC

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 290 BTU/Hr