Altronix T2PXK78 kit consists of Trove2 enclosure, TPX2 Paxton/Altronix backplane with one (1) 24VDC @ 10A power supply/charger, one (1) fuse protected eight (8) output access power controller and one (1) fuse protected eight (8) dual output power distribution module and one (1) voltage regulator. This kit also accommodates Paxton Net2 Plus boards for up to eight (8) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
Features
AL1024ULXB2 Power Supply/Charger
- Input
- Voltage: 115VAC 60Hz, 4.2A max
- Main Fuse: 5A / 250V
- Outputs
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
- Battery Backup (not included)
- Capacity: 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
- Supervision
- AC Failure: Form “C” contacts
- Battery: Form “C” contacts
- Indicators LED
- Input: 115VAC is present
- DC Output: Powered
- Battery: Discharged or not connected
ACM8 Access Power Controller
- Input
- Voltage: 24VDC from AL1024ULXB2
- Main Fuse: 10A / 32V
- Outputs
- Voltage: 12VDC
- Eight (8) 24VDC independently controlled fused outputs:
a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A.
b) Auxiliary power outputs (unswitched).
c) Any combination of the above - Output Fuses: 3.5A / 32VDC
- Indicators (LED)
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
VR6 Voltage Regulator
- Input/Output
- Voltage Range: 24VDC @ 10A = Output: 12VDC @ 6A
- Output
- 12VDC regulated output
- Output rating 6A max
- Surge suppression
- Indicators LED
- Input: Indicates input voltage is present
- Output: Indicates normal operating condition
PDS8 Dual Input Power Distribution Module
- Input
- Voltage Range: 5VDC to 24VDC, up to 10A each, 20A total input
- Main Fuse: 10A
- Outputs
- Fuse protected outputs rated @ 3A per output, non power-limited. Total output 20A max
- Do not exceed the individual power supply ratings
- Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
- Outputs Raitings
- 4.8VDC – 24VDC
- Indicators (LED)
- DC Output: Individual voltage LEDs indicate
- 12VDC (Green) or 24VDC (Red/Green)
- Features
- Multiple units may be daisy-chained to accommodate larger systems
Environmental
- Temperature
- Operating: 0° C to 50° C (32° F to 122° F)
- Storage: – 20° C to 70° C ( – 4° F to 158° F)
- Relative Humidity
- Relative Humidity 85% +/- 5%
- BTU/Hr (approx.):
- 113 BTU/Hr



















Reviews
There are no reviews yet.