Altronix T2RM7F8SQ 8-Door Altronix/Mercury Access & Power Integration Kit

Altronix T2RM7F8SQ rack kit consists of Trove2M2R enclosure/backplane with one (1) 24VDC @ 10A power supply/charger, one (1) dual input networked eight (8) fuse protected output access control module, one (1) voltage regulator and one (1) dual input eight (8) fuse protected output power distribution module. This kit also accommodates various combinations of Mercury* boards for up to eight (8) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.*Also compatible with these authentic Mercury partners:AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic Video Insight, Quintron, RS2, Schneider Electric, Vanderbilt

Features

eFlow104NB Power Supply/Charger

Input

• Voltage: 120VAC, 60Hz, 4.5A max
• Main Fuse: 6.3A / 250V

Output

• Voltage: 24VDC
• Current: 10A continuous
• Auxiliary: Class 2 power-limited @ 1A (unswitched)
• Other: Overvoltage protection. Filtered and regulated

Battery Backup

• Type: Sealed lead acid or gel type
• Fuse Rating: 15A/32V
• Failover: Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised: Latching or non-latching
• EOL: 10K Resistor

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge

Indicators LED

• Input: 120VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

VR6 Voltage Regulator

Input

• Voltage: 24VDC from eFlow104NB

Output

• Voltage: 12VDC
• Current: 6A continuous
• Other: Surge suppression

Indicators LED

• Input: 24VDC is present
• Output: Powered

PDS8 Dual Input Power Distribution Module

Input

• Voltage: 24VDC from eFlow104NB and 12VDC from VR6
• Input Fuse: 10A / 250V

Outputs

• Voltage: 12VDC and/or 24VDC
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Outputs Ratings

• Fuses: 3A/32V

Indicators (LED’s)

• DC Output: Eight (8) individual output LEDs
• Green: 12VDC
• Red: 24VDC

LINQ8ACM Networked Access Power Controller

Input

• Two (2) Independent Low Voltage Inputs:
• – Input 1: 24 VDC from eFlow104NB power supply
• – Input 2: 12 VDC from VR6 voltage regulator
• Input Fuses: 15A/32V

Outputs

• Fuse protected outputs
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Output Fuses:

• 3A/32V

Programming Features:

IEight (8) Programmable Outputs:

• – Fail-safe, fail-secure or auxiliary outputs
• – Input controlled or manually controlled through software
• – High (over) and low (under) voltage and current monitoring by output
• – Multiple outputs may be programmed to be triggered by a single input
• – Battery back-up by output

Eight (8) Programmable Trigger Inputs:

• – Normally open (NO), Normally colsed (NC) or Open collector sink inputs
• – Wet Input (5VDC – 24VDC) with 10k resistor
• – Any combination of the above

Other Programmable Trigger Inputs:

• – Monitor power supply(ies) input for voltage and currect limits (high/low)
• – Input and output current calibration, Programmable timer events
• – Programmable user levels, Enable or disable alerts by type
• – Programmable alert reporting delay

Indicators (LED)

• Green AC LED: indicates AC trouble condition
• Green BAT LED: indicates battery trouble condition
• Green FACP LED: indicates FACP disconnect is triggered
• Flashing Blue Heartbeat LED: indicates network connection
• Individual OUT1 – OUT8 Red LEDs: indicate outputs are triggered
• Individual Voltage LEDs: indicate 12VDC (Green) or 24VDC (Red)

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr. (approx.):

• 123 BTU/Hr