Altronix T2SAK7512 12-Door Altronix/Salto Access and Power Integration Kit – Trove2SA2 with AL1024ULXB2, AL1012ULXB, ACM8, ACM4, PDS8

Altronix T2SAK7512 kit consists of Trove2 enclosure, TSA2 Salto/Altronix backplane with one (1) 24VDC @ 10A and one (1) 12VDC @ 10A power supply/chargers, one (1) 8-output fused access power controllers, one (1) 4-output fused access power controller and one (1) 8-output dual output fused power distribution module.

This kit also accommodates up to six (6) Salto CU42E0, CU4200 or CU4EB8 modules for up to twelve (12) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

AL1024ULXB2 Power Supply/Charger – 1

• Input
• Voltage: 115VAC, 60Hz, 4.2A max
• Main Fuse: 5A / 250V
• Output
• Voltage: 24VDC
• Current: 10A @ 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

AL1012ULXB Power Supply/Charger – 2

• Input
• Voltage: 115VAC, 60Hz, 2.6A max
• Main Fuse: 5A / 250V
• Output
• Voltage: 12VDC
• Current: 10A @ 12VDC continuous max
• Other: Overvoltage protection. Filtered and regulated
• Both Power Supplies
• Battery Backup (not included)
• Capacity: 7AH /12VDC (4 within enclosure); 40 AH / 65 AH (requires separate enclosure)
• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous
• Supervision
• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Indicators LED
• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

PDS8 Dual Input Power Distribution Module

• Input
• Voltage Range: 24VDC from AL1024ULXB2 and 12VDC from AL1012ULXB
• Main Fuse: 10A/32V
• Outputs
• Voltage: 12 or 24VDC individually selectable
• Output Fuses: 3A/32VDC
• Indicators (LED)
• DC Output: Eight (8) individual output LEDs
• Green: 12VDC
• Red: 24VDC

ACM8 Access Power Controller

• Input
• Voltage: 24VDC from AL1024ULXB2
• Main Fuse: 10A / 250V
• Outputs
• Voltage: 24VDC
• Eight (8) 24VDC independently controlled fused outputs:
  a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A.
  b) Auxiliary power outputs (unswitched).
  c) Any combination of the above
• Output Fuses: 3.5A / 250VDC
• Indicators (LED)
• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

ACM4 Access Power Controller

• Input
• Voltage: 24VDC from AL1024ULXB2
• Main Fuse: 10A / 32V
• Outputs
• Voltage: 24VDC
• Four (4) independently controlled 2.5A outputs:
  a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
  b) Four (4) dry form “C” 5A rated relay outputs.
  c) Any combination of the above
• Output Fuses: 3A / 32V
• Indicators (LED)
• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

• Temperature
• Operating: 0° C to 50° C (32° F to 122° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)
• Relative Humidity
• Relative Humidity 85% +/- 5%
• BTU/Hr (approx.):
• 177 BTU/Hr