Altronix T2SAK78D 8-Door Altronix/Salto Access and Power Integration Kit

Altronix T2SAK78D kit consists of Trove2 enclosure, TSA2 Salto/Altronix backplane with one (1) 24VDC @ 10A power supply/charger, one (1) PTC access power controller, one (1) voltage regulator and one (1) dual input PTC power distribution module. This kit also accommodates up to four (4) Salto CU42E0, CU4200 or CU4EB8 modules for up to eight (8) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

AL1024ULXB2 Power Supply/Charger

Input

• Voltage: 115VAC, 60Hz, 4.2A max
• Main Fuse: 5A / 250V

Outputs

• Voltage: 24VDC
• Current: 10A @ 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

Battery Backup

• Capacity: 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts

Indicators LED

• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

PDS8CB Dual Input Power Distribution Module

Input

• Voltage: 24VDC from AL1024ULXB2 and 12VDC from VR6
• Input PTC: 9A

Outputs

• Voltage: 12VDC and/or 24VDC
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Outputs Ratings

• PTCs are rated 2.5A

Indicators (LED)

• DC Output: Eight (8) individual output LEDs
• Green: 12VDC
• Red: 24VDC

VR6 Voltage Regulator

Input

• Voltage: 24VDC from AL1024ULXB2

Output

• Voltage: 12VDC
• Current: 6A continuous
• Other: Surge suppression

Indicators LED

• Input: 24VDC is present
• Output: Powered

ACM8CB Access Power Controller

Input

• Voltage: 24VDC from AL1024ULXB2
• Main Fuse: 10A / 250V

Outputs

• Voltage: 24VDC
• Eight (8) 24VDC independently controlled PTC outputs:
• a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above
• Output PTCs: 2.5A

Indicators (LED)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 128 BTU/Hr