Altronix T3HWK7516 16-Door Altronix/Honeywell Access and Power Integration Kit – Trove3HW3 with THWD2, AL1024ULXB2, AL1012ULXB, (2) ACM8, PD8UL, RSB2

Altronix T3HWK7516 kit consists of Trove3 enclosure, THW3 Honeywell/Altronix backplane and THWD2 Honeywell/Altronix door backplane with one (1) 24VDC @ 10A and one (1) 12VDC @ 10A power supply/chargers, two (2) 8-output fused access power controllers and one (1) 8-output fused power distribution module. Also featured is a rocker switch bracket with two (2) rocker switches. THW3 backplane also accommodates up to six (6) Honeywell 4200 Series or WIN-PAK Series boards and up to two (2) Honeywell PRO22MX8/PW5K1MX8 boards for up to sixteen (16) doors in a single enclosure. THWD2 accommodates additional one (1) Honeywell PRO22MX8/PW5K1MX8 and up to six (6) Honeywell 4200 Series or WIN-PAK Series. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

AL1024ULXB2 Power Supply/Charger – 1

• Input
• Voltage: 115VAC, 60Hz, 4.2A max
• Main Fuse: 5A / 250V
• Output
• Voltage: 24VDC (UL 1481)
• Current: 8A continuous supply current with 10A supply current during alarm (UL 1481) 24VDC @ 10A (UL 294)
• Other: Short circuit and thermal overload protection. Filtered and regulated

AL1012ULXB Power Supply/Charger – 2

• Input
• Voltage: 115VAC, 60Hz, 2.6A max
• Main Fuse: 5A / 250V
• Output
• Voltage: 12VDC
• Current: 10A continuos supply current
• Other: Short circuit and thermal overload protection. Filtered and regulated
• Both Power Supplies
• Battery Backup (not included)
• Fuse Rating: 15A @ 32V
• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous
• Supervision
• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Indicators LED
• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

Two (2) ACM8 Access Power Controller

• Input
• Voltage: 24VDC from AL1024ULXB2
• Main Fuse: 10A / 250V
• Outputs
• Voltage: 24VDC.
• Eight (8) independently controlled fused outputs:
  a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A.
  b) Auxiliary power outputs (unswitched).
  c) Any combination of the above
• Output Fuses: 3.5A / 250V
• Indicators (LED)
• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

PD8UL Power Distribution Module

• Input
• Voltage: 12VDC from AL1012ULXB
• Outputs
• Voltage: 12VDC
• Eight (8) fuse protected outputs. 3.5A per output max
• Output Fuses: 3.5A / 250V
• Indicators (LED)
• Green LED: DC Output

Environmental

• Temperature
• Operating: 0° C to 50° C (32° F to 122° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)
• Relative Humidity
• Relative Humidity 85% +/- 5%
• BTU/Hr (approx.):
• 177 BTU/Hr