Altronix T3SSK7528 28-Door Altronix/Lenel-S2 Access and Power Integration Kit

Altronix T3SSK7528 kit consists of Trove3 enclosure, TSS3 Lenel-S2 (S2 Security Platform)/Altronix backplane with one (1) 24VDC @ 10A power supply/charger, one (1) 12VDC @ 10A power supply/charger, four (4) fused access power controllers, and two (2) fused power distribution modules. This kit also accommodates two (2) S2-INST Installation Kit sFor Lenel-S2 (S2 Security Platform) S2 Network Node for up to twenty-eight (28) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

AL1024ULXB2 Power Supply/Charger – 1

Input

• Voltage: 115VAC, 60Hz, 4.2A max
• Main Fuse: 5A / 250V

Output

• Voltage: 24VDC
• Current: 10A @ 24VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

AL1012ULXB Power Supply/Charger – 2

Input

• Voltage: 115VAC, 60Hz, 2.6A max
• Fusing: 5A / 250V

Output

• Voltage: 12VDC
• Current: 10A @ 12VDC continuous max
• Other: Overvoltage protection. Filtered and regulated

Both Power Supplies:

• Overvoltage protection
• Filtered and regulated

Battery Backup

Capacity: 12AH/12VDC (2 within enclosure) 40AH/65AH (requires separate enclosure)

Type: Sealed lead acid or gel type

Failover: Upon AC loss, instantaneous

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts

Indicators LED

• Input: 115VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

Three (3) ACM8 Access Power Controllers

Input

• Voltage: 24VDC from AL1024ULXB2
• Input Fuse: 10A / 250V

Outputs

• Voltage: 24VDC
• Eight (8) 24VDC independently controlled fused outputs for each ACM8
• a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above
• Output Fuses: 3.5A/250V

Indicators (LED)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

ACM4 Access Power Controller

Input

• Voltage: 24VDC from AL1024ULXB2
• Input Fuse: 10A/32V

Outputs

• Voltage: 24VDC
• Four (4) 24VDC independently controlled fused outputs for ACM4:
• a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above
• Output Fuses: 3A/32V

Indicators LED

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Two (2) PD16W Power Distribution Modules

Input

• Voltage: 12VDC from AL1012ULXB

Outputs

• Voltage: 12VDC
• Output Fuses: 3.5A/250V

Indicators LED

• Green LED: DC Output

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: – 20° C to 70° C ( – 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 289 BTU/Hr